Home > Technology > Communication

Engineers have achieved Wi-Fi using 10,000 times less power

  • By2016-12-13 10:39:50

Engineers have achieved Wi-Fi using 10,000 times less power. Science & Technology World Website


Wi-Fi is amazing, but there's no denying that all those hours of Netflix binging and scrolling Facebook can be a real energy suck, rapidly draining your phone's battery life.

But engineers in the US have just generated Wi-Fi transmissions that use 10,000 times less power than conventional methods, which means you can have everything downloading all the time, without sacrificing battery life. And it can already be used with off-the-shelf smartphones.

So far, the team from the University of Washington has only managed to achieve speeds of 11 megabits per second with the new connection, which isn't going to break records any time soon (it's no Li-Fi).

But they're working on getting the connection faster, and, more importantly, they've already shown that their 'passive Wi-Fi' technology works in real-world testing - it reportedly integrates "seamlessly" with existing routers and smartphones.

"We wanted to see if we could achieve Wi-Fi transmissions using almost no power at all," says one of the team, Shyam Gollakota.

"That’s basically what Passive Wi-Fi delivers. We can get Wi-Fi for 10,000 times less power than the best thing that’s out there."

A paper on the results is being presented in March next year at the USENIX Symposium on Networked Systems Design and Implementation.

It has yet to be peer-reviewed and independently verified, so we need to take it with a grain of salt, but the technology looks so promising, it's already been listed as one of the top 10 breakthrough technologies of 2016 by MIT Technology Review.

So how does it work? Right now, Wi-Fi signals require information to be sent across a digital frequency, known as a digital baseband, as well as an old-school analogue radio frequency (RF). 

Those two frequencies work together to send 'packets' of information that are decoded by your smartphone.

But while digital baseband technology has gotten a whole lot more efficient over the past few decades, allowing information to be sent using hardly any energy at all, analogue radio frequency devices have stalled, and still suck up hundreds of milliwatts of power.

That's a problem, because to receive Wi-Fi on your smartphone, you need a digital and an analogue RF receiver, hence your phone's crappy battery life.

The new University of Washington system overcomes that, by decoupling analogue and digital, and relegating all analogue RF functions to one single plug in device.

That plugged in device generates the Wi-Fi signal using an array of sensors, and those Wi-Fi packets are then reflected and absorbed using a digital switch known as the 'passive Wi-Fi' device, which runs on barely any energy at all.

The passive Wi-Fi bounces the information to your smartphone or router, where it can be received by consuming only 15 to 60 microwatts of power - 10,000 times less than current devices.

Key Words : Engineers Wi-Fi power

Popular

0411-39731515-8029kfzx@twwtn.com

ICP:09019593 Network Management No:20110200020

Operation license of appreciation telecom service:B-2-4-20100139

Science & Technology World Website has all rights Copyright @ 2010-2016 by www.twwtn.com. all rights reserved